Jiaozuo brake

For the brake loss caused by electrical faults, the above method cannot be used. Instead, the protective box knife switch should be quickly opened to cut off the power of the winch brake and adjust the brake holding brake.

Electric hydraulic block brake series

YWZB YWZ3B YWZ4B YWZ5 YWZ8 YWZ9 YWZ12 YWZ13 YW YWL TYWZ2 YWP

Electromagnetic block brake

JZ (TJ2A) MW (Z) ZWZA ZWZ2 ZWZ3A DCW3

Electromagnetic failure protection disc brake

5SE 561SE 560SE 56SE

DCPZ12.7

4SE 3SE ST1SE ST2SE 450SE

Hydraulic failure protection disc brake

5SH 4SH 3SH 450SH ST1SH ST2SH ST3SH ST4SH

SB (YQP) SBDST5SH ST10SH ST16SH ST25SH ST25SH-A ST40SH 904SH

SBB

Electro hydraulic arm disc brake

YPZ2 I, II, III

YPZ2 IV, V, VI

Pneumatic caliper disc brake

QP12.7 5SP 4SP 3SP 450SP

PD

ADP60M-ADP61M-ADP62M

Hydraulic direct acting disc brake

DADH75

ADH60

ADH90

ADH120

DADH80

DADH90

DADH120

DADH103

DADH195

Electric hydraulic thruster

YT1

Ed

Explosion proof electric hydraulic thruster

BYT1

BED

Safety windproof brake

YFX (YAF) DFX (DAF) YDGZ YDGZ-40 YLBZ

The hydraulic push rod brake is driven by the Ed series electric hydraulic thrusters imported from German EMG company, and its installation dimensions comply with JB/ZQ 4388-86.

Usage conditions: Environmental temperature: -20~+50 ℃. The relative humidity of the air shall not exceed 90%. In a place where there is no explosion hazard and there is no gas or conductive dust in the medium that can corrode metals and insulation. Generally used for three-phase AC power supplies of 50Hz and 380V (products with different voltages of 50Hz or 60Hz can be provided according to user requirements).

Electric hydraulic brakes are widely used in various lifting transportation, port loading and unloading, metallurgical equipment, mining machinery, and engineering machinery for deceleration and parking (maintenance) braking.