Jiaozuo brake

Installation and usage requirements for explosion-proof electric hydraulic thrusters:

Conduct various inspections before installation, and if they do not meet the requirements, they are not allowed to be used. The thrust on the pusher nameplate should match the required thrust. 2. Pusher logo and explosion-proof certificate number. 3. Explosion proof level of the thruster. All sturdy bolts should be tightened, and all components of the explosion-proof enclosure should be properly connected. 5. Explosion proof parts should be free from cracks and issues that affect explosion-proof performance.

The specific parameters for ordering BED explosion-proof thrusters: advantages: smooth operation, no noise, low power consumption, long service life, and convenient maintenance. Suitable for operating electric hydraulic block brakes. Color: red, green Structural features: connecting rod, refueling plug, cylinder body, inlet hole, motor.

Working principle: Power on. The electric motor is energized to drive the impeller to generate pressure oil, and the piston and push rod are pushed upwards under the action of pressure oil. After reaching the end of the stroke, they stop and maintain this position; The power supply is disconnected, the motor and impeller stop running, the oil pressure disappears, the thrust is eliminated, and the push rod and piston return to their starting position under external force

ED explosion-proof standard network diagram

Brake Factory BED-50/6 BED80/6 Explosion proof Pusher for Coal Mines Explosion proof Electric Hydraulic Pusher BYT1-90Z/8 Explosion proof Electric Hydraulic Pusher BYT1-25Z/4 Explosion proof Electric Hydraulic Pusher BYT1-320Z/12 Coal Mine Special Explosion proof Electric Hydraulic Pusher BYT1-45Z/6 Explosion proof Electric Hydraulic Pusher BYT1-180Z/12 Explosion proof Electric Hydraulic Pusher BYT1-125Z/10 Explosion proof Electric Hydraulic Pusher BEd-30/5 Explosion proof Electric Hydraulic Pusher BEd301/6 Explosion proof Electric hydraulic thruster BED-121/6BED-50/6 Explosion proof electric hydraulic thruster BED-201/6 Mining explosion-proof electric hydraulic thruster BED-80/6 Explosion proof electric hydraulic thruster BED-50/6 Explosion proof electric hydraulic thruster YT1-180/12 Electric hydraulic thruster YT1-90/8 Electric hydraulic thruster YT1-45/6 Electric hydraulic thruster YT1-25/4 Electric hydraulic thruster YT1-320Z/20 Electric hydraulic thruster YT1-320Z/12 Electric hydraulic thruster YT1-180Z/10 Electric hydraulic thruster ACTUATOR YT1-125Z/10 Electric Hydraulic Pusher

Quotation for flameproof electric hydraulic thrusters

Usage conditions: The altitude meets the requirements of GB755-2000, with an ambient temperature of -20 ℃ to+40 ℃. The average relative humidity of the installation site in the wet month does not exceed 90%. The pollution level of the surrounding environment allows for a three-phase AC power supply of 127V, 220V, 380V, 660V, 1140V/50HZ (60HZ).

This product complies with the technical requirements of the enterprise standard Q/JZHF01-2009 explosion-proof electric hydraulic thruster. The explosion-proof mark is "ExdI", which is suitable for electric hydraulic drum brakes used in coal mine belt conveyors (non mining working faces) and mine lifting equipment. The electric hydraulic actuators are mainly used for BYWZ, BYWZ3, BYWZ4, BYWZ5, BYWZ8, BYWZ10, BYWZ9, BYWZ13, BYW series electric hydraulic brakes

The thruster is an ideal component for achieving semi automation and automation of certain mechanical equipment. The piston rod adopts advanced protection, which can reduce wear and corrosion. The oil chamber of the hydraulic system with double-layer protective seal and double-layer sealing ring greatly improves the service life of the thruster. The thruster has the advantages of stable and noise free operation, low power consumption, long service life, and convenient maintenance.