Jiaozuo brake

Hydraulic brake

(Normally closed, shaft mounted)

The brake controls the braking and separation of the power shaft through oil pressure, pressure relief braking, and pressure boosting separation

It can be used in both dry oil-free and wet oil-immersed environments

With manual release function, the friction plate can be manually released during pressure relief

Multi friction plate structure, long service life

Excellent torque holding function and high safety

The brake is composed of a magnetic yoke, excitation coil, spring, brake disc, armature, spline sleeve, installation screws, etc. The brake is installed at the rear end of the flange plate (or motor) of the equipment; The transmission shaft is connected to the spline sleeve and the brake disc.

When the excitation coil of the brake is connected to the rated voltage (DC), the electromagnetic force pulls on the armature to separate (release) the armature from the brake disc. At this time, the transmission shaft runs or starts normally with the brake disc. When the transmission system is separated or powered off, the brake is also powered off at the same time. At this time, the spring is applied to the armature, forcing the brake disc to produce Friction torque between the armature and the flange, so that the transmission shaft stops quickly. When the heat dissipation environment of the brake is poor and the transmission shaft operates continuously for a long time, if conditions permit, the voltage can be maintained to convert to 70% -80% of the rated voltage after the brake operates to reduce heating.

Brake specifications: YZA1-315/23/model: Y 2 sets 2 brake specifications: YZA1-400/80/model: Y 2 sets 3 brake assembly specifications: YZA1-400/121/model: Y 1 set 4 brake assembly electric hydraulic brake specifications: YZA1-300/80/model: Y

Automatic compensation brake specification: YZA1-400/121B/model: Y 6 sets 4 Automatic compensation brake specifications: YZA1-500/121B/model: Y 2 sets 5 brake specifications: YZA1-315/23/model: Y

YWZ9 series electric hydraulic block brake:

YW160-E23 electric hydraulic drum brake shoe

Electric hydraulic brake YWZ9-200/23; YWZ9-200/30; YWZ9-250/23; YWZ9-250/30; YWZ9-250/50; YWZ9-300/30; YWZ9-300/50; YWZ9-300/80; YWZ9-315/30; YWZ9-315/50; YWZ9-315/80; YWZ9-400/50; YWZ9-400/80; YWZ9-400/121; YWZ9-500/80; YWZ9-500/121; YWZ9-500/201; YWZ9-600/121; YWZ9-600/201; YWZ9-600/301; YWZ9-630/121; YWZ9-630/201; YWZ9-630/301; YWZ9-700/201; YWZ9-700/301; YWZ9-710/201; YWZ9-710/301; YWZ9-800/301/12