Jiaozuo brake

The connection dimensions and braking torque parameters of YWZ5 and YWZE series brakes comply with GB6333-86 standard, and the technical requirements comply with JB/T6406-2006 standard; The YWZ5 series is equipped with YTD series thrusters that comply with the JB/T10603-2006 standard; The YWZE series is equipped with Ed series thrusters that comply with the DIN15430 standard.

The spring pressure should be marked, and the greater the torque required, the better the braking performance. It is advisable to shorten the distance between the bolts in the middle of the two brake pads and increase the hydraulic tappet by 0.2-0.5mm. Conversely, the brake fails. The brake pad is pressed tightly on the brake wheel to achieve braking. A single brake block has a large and uneven pressure on the brake wheel axle, so an additional pair of brake blocks is usually used to counteract the pressure exerted by the brake blocks on the brake wheel axle. There are two types of block brakes: externally held and internally tensioned. External block brake

It is divided into short stroke block brakes and long stroke block brakes according to the length of the control device's stroke. The magnet of the short stroke block brake is directly installed on the brake arm. During operation, the moving iron core rotates around the pin shaft to achieve brake release; When the magnet is powered off, it is tightly closed by the main spring. This type of brake has a compact structure, with fast tightening and releasing actions, but high impact force. Long travel block brakes can generate a large release force through the brake lever system, but the braking action is stable and suitable for various sizes of deceleration equipment.

The structure of the YWZE-710/301 hydraulic brake electric hydraulic push rod brake is composed of two major parts: a brake frame and a matching hydraulic thruster (Figure 2). The brake frame is composed of brake pads, main springs, brake arms, adjustment rods, etc. The upper part of the hydraulic thruster is the same small electric motor, and the lower part is the same small centrifugal fuel injector. The piston of the fuel injector is connected to its two upper push rods. Long running

YWZE series electric hydraulic block brakes:

YWZE electric hydraulic drum brake shoe

YWZE-200/23; YWZE-200/30; YWZE-250/23; YWZE-250/30; YWZE-250/50; YWZE-300/30; YWZE-300/50; YWZE-300/80; YWZE-315/30; YWZE-315/50; YWZE-315/80; YWZ-400/50; YWZE-400/80; YWZE-400/121; YWZE-500/80; YWZE-500/121; YWZE-500/201; YWZE-600/121; YWZE-600/201; YWZE-600/301; YWZE-630/121; YWZE-630/201; YWZ-630/301; YWZ-700/201; YWZE-700/301; YWZE-710/201; YWZE-710/301; YWZE-800/301/12

YWZE