Jiaozuo brake

The ED.YTI.MYT1.YTD series electric hydraulic thrusters are a new type of single push rod thruster designed based on China's national conditions and with reference to domestic and international leading product plans. They have the advantages of safe and reliable operation, sensitive and stable upward and downward movements, easy repair, and low quotation. They have excellent practicality and versatility, and the product meets the requirements of DQ4516. The protection level of the thruster shell is IP54 (GB4208-84)

The interlocking back distance equalization device (patented technology) and the automatic tile following device can always maintain equal back distance of both sides of the tiles without adjustment, completely avoiding the phenomenon of one brake pad floating against the brake wheel due to uneven back distance.

The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use.

The brake spring is arranged inside the square tube and equipped with a ruler, making it very convenient for users to read the braking torque value, eliminating the trouble of measurement and calculation.

The brake pad is a card mounted integral shaped structure, which is very convenient and fast to replace. There are different materials of brake pads available for users to choose from, such as semi metal (asbestos free) hard and semi hard, soft (asbestos containing, asbestos free).

It can be matched with our company's new thruster, with sensitive action and long service life.

ED50 detection image

Additional devices:

Manual release device

Releasing (opening) limit switch can display whether the brake is released normally.

The automatic compensation device for brake pad wear can achieve stepless automatic compensation for pad backoff and braking torque when pad wear occurs.

The limit switch for pad wear can achieve signal display when the brake pad is worn to its limit (note: applied to brakes that require automatic compensation devices).

Using a thruster with a lowering delay valve to drive, the delayed closure of the brake can be achieved.

Electric hydraulic brake model

Composition: brake pads, brake arms, brake wheels, brake release devices, etc

Purpose: Mainly used for mechanical braking of driving devices in lifting, transportation, metallurgy, mining, ports, and construction machinery

Model classification: YWZ, YWZ2, YWZ3, YWZ4, YWZ5, YWZ9, etc

operational principle

This series of hydraulic push rod brakes consists of two main parts: a brake frame and a matching ED type electric hydraulic thruster. When powered on, the electric hydraulic thruster acts, its push rod quickly rises, and the brake shoe is opened (released) through the action of a lever; When the power is cut off, the push rod of the electric hydraulic thruster rapidly descends under the action of spring force and closes the brake shoe (holding brake) through lever action

Usage This product is widely used in lifting and transportation, metallurgy, mining, port, construction, building materials and other work as a driving device for mechanical braking of external holding brake, and can also be used as a power source for other methods of motion, such as reciprocating, shaking, Circular motion, etc.

The motor is a three-phase AC asynchronous motor that complies with the regulations of GB755-87, and has an insulation level of E. Application conditions:

1. Continuous operation S1, continuous operation S3, with a load duration rate of FC=40%

2. The rated frequency is 50Hz, and the rated voltage is 380V (three-phase AC voltage)

3. The altitude of the application address meets the standard (GB755-87)

4. The ambient temperature should be within the range of -20 ℃ to 40 ℃, and the relative humidity of the air should not exceed 90%. 5. It is generally suitable for vertical equipment, piston rod connection blocks facing upwards, and the inclination should not exceed ± 15 °.

45 Pusher Multi Real Image

The MYT3 series electric hydraulic thruster is a new type of single push rod thruster based on the national conditions of our country and taking into account the planning of domestic and foreign leading products. It has the advantages of safe and reliable operation, sensitive and stable upward and downward movements, convenient repair, and low quotation. Its practicality and versatility are superior, and the product meets the requirements of DQ4516. The protection level of the thruster shell is IP54 (GB4208-84)

This product is widely used in lifting and transportation, metallurgy, mining, port, construction, building materials and other work as the driving equipment of the external holding brake for mechanical braking, as well as as the power source for other methods of motion, such as reciprocating, rocking, Circular motion, etc.

The motor is a three-phase AC asynchronous motor that complies with the regulations of GB755-87, and has an insulation level of E. Application conditions:

1. Continuous operation S1, continuous operation S3, with a load duration rate of FC=40%

2. The rated frequency is 50Hz, and the rated voltage is 380V (three-phase AC voltage)

3. The altitude of the application address meets the standard (GB755-87)

4. The ambient temperature should be within the range of -20 ℃ to 40 ℃, and the relative humidity of the air should not exceed 90%. 5. It is generally suitable for vertical equipment, piston rod connection blocks facing upwards, and the inclination should not exceed ± 15 °.