Jiaozuo brake

Our company is a member of the Brake Association and is an enterprise in the industry that has obtained the safety mark for mining products. We have also been the first to pass the ISO9001 quality system certification. All kinds of qualifications are complete, and we have obtained the "Type Test Certificate" for brakes, the "National Industrial Product Production License" for explosion-proof electrical equipment, the "Explosion Proof Certificate", and the "Safety Mark for Mining Products". The hydraulic thruster forces the push rod to move to the right, causing the main spring to be stretched and the distance between the left and right brake arms to increase. The two pads leave the brake wheel and the brake is in an open state.

Arrange two brake arms symmetrically on both sides of the brake wheel and hinge the two pads together, so that the positive pressure under the two pads is equal and the closing force on the two brake arms is equal.

Inspection before installation:

Check whether the brake is damaged or missing during transportation or storage; Check if the surface of the brake wheel is clean. If there is oil or other dirt, it should be thoroughly cleaned. The YWZ series electric hydraulic block brake adopts the MYT1 series thruster as the driving device of the brake. The installation dimensions comply with JB/ZQ4388-86 standard. Mainly used for mechanical braking of mechanical driving devices in lifting transportation, metallurgy, mining ports, construction, etc

This eliminates the lateral force on the brake wheels. Installing an electromagnet on the brake arm can shorten the braking stroke (<5mm). The pressure of the main spring can be adjusted by a nut located at its end and installed on the push rod. The opening degree of the two system boom is limited by the adjustment of the limit screw., Electric hydraulic block brake is a driving device for mechanical deceleration and parking, mainly used in lifting, metallurgy, mining, ports, docks, construction and other machinery.

Environmental requirements for use:

Environmental temperature: -40 ℃~+50 ℃.

Relative humidity: ≤ 90%.

Altitude: In accordance with relevant regulations of GB755-2000.

The characteristics are manifested in:

1. Safe and reliable performance, smooth braking, and high action frequency.

2. The main swing hinge points are equipped with automatic lubrication bearings, which have high transmission efficiency and long service life, and do not require lubrication during use.

3. This series of brakes can be added according to customer needs.

4. The plug-in brake pads are securely and reliably installed, and replacement is convenient and fast.

5. There is no need to adjust the interlocking equal distance device. During use, always maintain equal distance between the pads on both sides to avoid the phenomenon of uneven distance causing the brake pad on one side to float against the brake wheel

Widely used in lifting, metallurgy, mining, ports Main products in construction and other machinery include: electric hydraulic block brake series YWZB YWZ3B YWZ4B YWZ5 YWZ8 YWZ9 YWZ12 YWZ13 YW YWL TYWZ2 YWP electromagnetic block brake JZ (TJ2A) MW (Z) ZWZA ZWZ2 ZWZ3A DCW3 electromagnetic failure protection disc brake 5SE 561SE 560SE 56SE DCPZ12.7 4SE 3SE ST1SE ST2SE 450SE hydraulic failure protection disc brake 5SH 4SH 3SH 450SH ST1SH ST2SH SH ST3SH ST4SH SB (YQP) SBDST5SH ST10SH ST16SH ST25SH ST25SH-A ST40SH 904SH SBB electric hydraulic arm disk brake YPZ2 Ⅰ, Ⅱ, Ⅲ YPZ2 Ⅳ, Ⅴ, Ⅵ pneumatic caliper disk brake QP12.7 5SP 4SP 3SP 450SP PD ADP60M-ADP61M-ADP62M hydraulic direct acting disk brake DADH75 ADH60 ADH90 ADH120 DADH80 DADH90 DADH120 DADH103 DADH195 electric hydraulic thruster YT1 Ed explosion-proof electric hydraulic thruster BYT1 BED

In recent years, our company's sales market has gradually expanded. Currently, our sales outlets have spread to multiple provinces, cities, and districts across the country, and we have a strong and high-quality after-sales service team, forming a certain after-sales service network. The product quality and after-sales service have been highly praised by users. In 1993, our products were inspected and qualified by the National Quality Supervision and Inspection Center for Lifting and Transportation Machinery, and passed the quality system certification in 2002.

Our company's long-term service tenet is market-oriented, technology guaranteed, integrity driven development, and quality driven survival! In the new century, we will meet new challenges with new resources, adhere to keeping up with the times, explore and innovate, and serve our customers with high-quality products, low prices, and good services. Willing to make friends, cooperate sincerely, and develop together with colleagues from all walks of life!