Jiaozuo brake

The connection dimensions and braking torque parameters of the electric hydraulic brake comply with the JB/ZQ4388-86 standard, and the technical requirements comply with the JB/T6406-2006 standard; YWZF is equipped with Ed series thrusters that comply with DIN15430 standard;

Main features:

Interlocking type equal back distance device (patented technology) and automatic tile following device can always maintain equal back distance of both sides of the tiles without adjustment, completely avoiding the phenomenon of one brake pad floating against the brake wheel due to uneven back distance.

The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use.

The brake spring is arranged inside the square tube and equipped with a ruler, making it very convenient for users to read the braking torque value, eliminating the trouble of measurement and calculation.

The brake pad is a card mounted integral molding structure, which is very convenient and fast to replace. There are different materials of brake pads available for users to choose from, such as semi metal (asbestos free) hard and semi hard, soft (asbestos containing, asbestos free).

It can be matched with our company's new thruster, with sensitive action and long service life.

We can adjust the input power of the push rod by controlling its speed through a switch, thereby achieving speed control.

Obviously, if the electric speed regulators configured in the electro-hydraulic push rod are different, the actual control modes that can be achieved will also be different. If distinguished from the perspectives of structure, working principle, and power supply mode, it can be divided into explosion-proof electric push rod, DC mode, AC mode, step mode, permanent magnet electromagnetic synchronous mode, three-phase asynchronous induction mode, and so on. As a key component of automobile safety performance, brakes have always been the focus of attention and research by domestic and foreign experts and scholars. The quality and efficiency of their braking performance will directly affect the safety of transportation. Therefore, it is necessary to pay attention to the selection of brake accessories

According to the actual application, in fact, single-phase electric speed governor and three-phase electric speed governor are common in electro-hydraulic push rod products, which are distinguished according to the different working power modes; According to different forms of protection, electric speed regulators can be divided into three levels: first level, second level, and third level.

In addition to the above classification methods, the operating speed and insulation level can also serve as the classification basis for electric speed regulators in electro-hydraulic push rod products. The former can be divided into constant speed motors, high-speed motors, low-speed motors, and speed regulating motors; The latter can be divided into local insulation mode, full insulation mode, and semi insulation mode

Electric hydraulic brake, electric hydraulic thruster, electric hydraulic block brake, explosion-proof electric hydraulic thruster, explosion-proof electric hydraulic brake, explosion-proof electric hydraulic thruster, ED electric hydraulic thruster, YT1 electric hydraulic thruster, BED explosion-proof electric hydraulic thruster, BYT1 explosion-proof electric hydraulic thruster, hydraulic disc brake, electromagnetic disc brake, wind power yaw brake pad, wind power yaw brake, Wind power brake, pneumatic disc brake, pneumatic caliper disc brake, electromagnetic power loss brake, disc brake pad, electric hydraulic brake pad, YWZ electric hydraulic brake, YWZB electric hydraulic brake, YWZ2 electric hydraulic brake, YWZ3 electric hydraulic brake, YWZ4 electric hydraulic brake, YWZ4B electric hydraulic brake, YWZ5 electric hydraulic brake, YWZ8 electric hydraulic brake, hydraulic block brake, The YTD series thruster is used as the driving device for the brake. Mainly used for mechanical braking of driving devices in lifting, transportation, metallurgy, mining, ports, and construction machinery.

The installation dimensions comply with JB/ZQ4388-97 standard. The technical conditions comply with the JB/T6406-2006 standard.