Jiaozuo brake

Durable electric hydraulic thruster Ed121/6 Ed201/6 Ed301/6, including motor, hydraulic cylinder, impeller, push rod, and piston; The motor is located below the hydraulic cylinder, which is divided into a lower impeller chamber and an upper working chamber. The impeller is located in the impeller chamber and is connected to the motor rotor shaft. The push rod and the piston connected to the push rod are located in the working chamber. The piston is externally equipped with a cylinder liner, which is combined with the hydraulic cylinder body as a whole; The front and back of the impeller are equipped with blades, and the upper end of the impeller is equipped with valve blocks. The valve blocks are located on both sides of the impeller, forming a double oil inlet with the upper wall of the impeller chamber, and the cylinder liner and hydraulic cylinder form a double oil return port. The electric hydraulic thruster of this utility model adopts a dual circuit structure, which reduces the blade diameter, reduces shaft power, increases the service life of the motor and blades, reduces the power of the motor, and achieves energy-saving purposes. Durable electric hydraulic thruster Ed121/6 Ed201/6 Ed301/6 Electric hydraulic thruster Ed50/6 Ed80/6 Ed30/6 23/5

1-ED121 Workshop Drawing

It is also a common fault that the brake cannot be opened. Firstly, check whether the coil of the brake is burnt out. If the coil is burnt out, it needs to be replaced and wired again. Secondly, check if the friction plate of the brake has experienced excessive surface temperature and brake wheel adhesion due to frequent braking. If this is the case, the brake wheels should be cleaned with gasoline and the friction plates should be replaced. The ED model parameters and appearance diagram should be provided