Jiaozuo brake

The adjustment of hydraulic brakes is fundamentally the same as the equipment method of electromagnetic brakes, but the following points should be noted:

1) Under the condition of ensuring a small gap in the brake shoe, the smaller the working stroke of the push rod, the better. Therefore, the connecting rod can be used to adjust the push rod to make the equipment height comply with relevant rules.

2) In order to ensure that the clearance between the brake pads can still be consistent when the brake pads are worn, the hydraulic electromagnetic brake is equipped with a compensation stroke device, which uses a connecting rod to adjust the distance between the end face of the push rod joint and the cylinder head. This value is called the compensation stroke of the compensation device, and it should comply with the rules.

3) When the push rod rises to a high position, while ensuring a small gap in the brake shoe, adjust the limit screws of the pressure rod at both ends to ensure that the gap between the brake shoe and the brake wheel remains flat.

4) The force distance of the hydraulic brake tension spring, equipment length, and equipment force should comply with relevant rules.

5) The operating oil pressure of the hydraulic brake should meet the requirements of the drawing,. When there is no need for drawings, oil can be recommended according to the operating ambient temperature.

Electric hydraulic brake

Our main products include YT1, ED, YTD.ED2, MYT1, MYT2 series electric hydraulic thrusters

JZ, MW, TJ2, ZWZA, ZWZ3 series electromagnetic brakes

YWZ, YWZ3, YWZ4, YWZ5, YWZ8, YWZ10, YWZ9, YWZ13, YW series electric hydraulic brakes

QP, CQP, QPL series pneumatic caliper disc brake. DCPZ series electromagnetic caliper disc brake

YPZ series arm disc brake

SBD series safety brake SH, ST series hydraulic failure protection brake

DADH series hydraulic direct acting brake SE series electromagnetic failure protection brake

YFX, YDGZ, YLBZ, series windproof brake SP series pneumatic failure protection brake, DP series motor disc brake DYT series electro-hydraulic thruster

Customized various brake wheels and discs, and customized non-standard brakes according to user needs