Jiaozuo brake

YWK series hydraulic brake

YWK series electric hydraulic drum brakes are mainly used for the deceleration braking of the crane running mechanism of all kinds of general bridges and Gantry crane, and also for the deceleration braking of the non lifting winch drive device.

Compliant with standards:

The connection dimensions and braking torque parameters of YWK series normally open brakes comply with JB/T6406-2006 and DIN15435 standards, and are matched with YTD series thrusters that comply with JB/T10603-2006 standards.

Main features:

Interlocking type equal back distance device (patented technology) and automatic tile following device can always maintain equal back distance of both sides of the tiles without adjustment, completely avoiding the phenomenon of one brake pad floating against the brake wheel due to uneven back distance.

The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use.

The brake pad is a card mounted integral molding structure, which is very convenient and fast to replace. There are different materials of brake pads available for users to choose from, including semi metal (asbestos free) hard and semi hard, soft (asbestos free) brake pads.

Basic parameters:

Product models: YWK160, YWK200, YWK250, YWK300, YWK315, YWK400, YWK500

Applicable wheel diameter: 160-500mm

Braking torque: 100-3550Nm

The YWH series electric hydraulic drum brake is widely used for deceleration and parking (maintenance) braking of various mechanisms in various lifting and transportation, port loading and unloading, metallurgical equipment, mining machinery, and engineering machinery.

Compliant with standards:

The connection dimensions and braking torque parameters of the YWH series brake comply with the JB/T6406-2006 standard and DIN15435 standard; Equipped with Ed series thrusters that comply with DIN15430 standard. This series is mainly suitable for places with small installation space, where YW, YWZ2, YWZ4 and other forms cannot be arranged.

Main features:

Interlocking type equal back distance device (patented technology) and automatic tile following device can always maintain equal back distance of both sides of the tiles without adjustment, completely avoiding the phenomenon of one brake pad floating against the brake wheel due to uneven back distance.

The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use.

The brake spring is arranged inside the square tube and equipped with a ruler, making it very convenient for users to read the braking torque value, eliminating the trouble of measurement and calculation.

The brake pad is a card mounted integral molding structure, which is very convenient and fast to replace. There are different materials of brake pads available for users to choose from, including semi metal (asbestos free) hard and semi hard, soft (asbestos free) brake pads.

The matching series of thruster products are sensitive in action and have a long service life.

Basic parameters:

Product models: YWH160, YWH200, YWH250, YWH300, YWH315, YWH400, YWH500

Applicable wheel diameter: 160-500mm

Braking torque: 80-4000Nm