Jiaozuo brake

What is the problem with the electric hydraulic brake slipping and not stopping

The installation size and operation of each type of brake are different, and the brakes are divided into three types: normally closed, normally open, and comprehensive. Most cranes use normally closed brakes. Normally closed brakes are closed during periods when the mechanism is not in operation. If you want the mechanism to work, you only need to release the brake to separate the friction pairs of the brake, and the mechanism can operate. The brakes used on cranes are divided into block brakes, belt brakes, disc brakes and cone brakes according to their shapes. The purpose of the crane braking device is that the braking device is an important component to ensure the safe and normal operation of the crane. During lifting operations, the braking device is used to prevent objects or lifting arms from falling during suspension, and to prevent the turntable or crane from sliding under the action of wind or slope forces; Or reduce the speed of the running mechanism and then stop moving; It can also be operated by clamping heavy objects according to work needs; In special circumstances, the movement speed can be adjusted by controlling the balance between power and gravity. Brake 15838971872

Note: YWZ4B, YWZB, YWZB, YWZ8, and YWZ13 are interchangeable. YWZB matches the YT type thruster, while YWZ4B, YWZ8, and YWZ13 match the Ed type thruster.

Electric hydraulic block brakes are widely used for deceleration or parking braking of mechanical drive devices such as lifting, metallurgy, mining, ports, docks, construction machinery, etc. Safe and reliable performance, smooth braking, and high action frequency.

The main swing hinge point is equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use. Comply with standard installation dimensions and JB/ZQ4388-1997 standards.

Operating conditions Environmental temperature: -20 ℃~+50 ℃ The relative air temperature should not exceed 90%. The surrounding working environment should not contain flammable, explosive, or corrosive gases. The altitude of the location of use should comply with GB755-2000. Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.