Jiaozuo brake

The recommended hydraulic oil for electric hydraulic thrusters is according to Table 6 based on different ambient medium temperatures. The surrounding medium temperature is+45 ℃~+21 ℃+20 ℃~+0 ℃+0 ℃~-15 ℃~-15 ℃~-30 ℃ - below 30 ℃. 20 # mechanical oil GB443-64, 10 # transformer oil (freezing point -10 ℃) SYB1351-62, 25 # transformer oil (freezing point -25 ℃) SYB1351-62, instrument oil (freezing point -60 ℃) GB487-65, a mixture of alcohol and glycerol, is recommended to use oil to connect the lower part of the hydraulic thruster with a pin, Connect the connecting rod of the crossbeam with the lever device using a pin shaft. After testing whether the external power supply matches the motor nameplate, correctly connect the motor terminal to the external power supply. Connect the power supply and check whether the impeller operates flexibly and whether the push rod lifts smoothly. 2. Use and maintenance: check whether the electric hydraulic thruster works normally and whether there is oil leakage or oil seepage. A constant amount of oil should be maintained.

Mainly used as an operating component for the YWZ4, YWZ5, YWZ8, YWZ9, YWL.YW.YWZP series electric hydraulic block brakes. It is widely used in industries such as lifting transportation, metallurgy, mining, port electric hydraulic block brake ports, and construction.

ED electric hydraulic thruster

Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed301/6

Z9 and Z4 pictures [if matched with the YWZ series brake, hold the brake]. YT1-18Z/2 YT125ZB/4 YT125ZC/4 YT1-45Z/4 YT1-45Z/5 YT1-45Z/6 YT1-90Z/6 YT1-90Z/8 YT1-125Z/10 YT1-180Z/8 YT1-180Z/10 YT1-180Z/12 YT1-320Z/12 (B) YT1-320Z/20 (A) YT1-320Z/35 YT1-350Z/12 YT1-350Z/20 YT1-350Z/35ED23/5- ED301/6 IV. Instructions for use: 1 Installation test: First, check whether the thrust on the nameplate of the electric hydraulic thruster product matches the required force: remove oil stains on the motor and body surface, and check whether the push rod lifting is smooth. Unscrew the oil filling plug 5 (Figure 3) and oil level plug 3, and inject suitable and pure hydraulic oil until the screw hole 3 is reached. Then tighten screw plug 3 and screw plug