Jiaozuo brake

Smelting special pneumatic caliper disc brake QP12.7-ACQP12.7

■ QP, CQP, DCPZ series caliper disc brake

Caliper disc brake is an advanced product that not only has the advantages of disc brake, but also has wide adaptability and unique advantages. This product has a simple structure

Single, small in size, light in weight, high in reliability, easy to use, suitable for various disc diameters, easy to install, debug, and maintain. Widely applicable for lifting and transportation

Deceleration and braking of fixed operating mechanisms such as transportation, metallurgy, mining, ports, construction, bulk loading and unloading, as well as tension control of machinery such as cables, paper making, and steel plates

Domain.

main features 

Compact structure, small size, light weight, high reliability, and convenient installation and use.

Sensitive action and flexible control.

● QP series pneumatic caliper disc brake meets the installation performance requirements of foreign similar products. Matched with imported air bags, reliable performance and long service life.

The brake pad adopts a pressure spring clamp type, with a unique structure and convenient and fast replacement.

A display device can be installed to visually display the working status of the brake.

All power sources do not need to be set separately and can be used in conjunction with existing air compression stations. Speed control valves are installed in the gas supply line, and the braking time can be adjusted steplessly.

● Normally closed design: spring braking, pneumatic release.

Normally open design: pneumatic braking, spring release, and braking force can be flexibly changed with air pressure.

Overview

The QP (CQP) series pneumatic caliper disc brakes are mainly used in lifting, transportation, metallurgy, mines, and ports

The braking and deceleration of various mechanisms in machinery such as machinery and construction.

Usage conditions

Environmental temperature: -5 ℃~40 ℃

● Working air pressure: 5-7bar for QP series;

The CQP series is ≤ 7bar.

Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.

The air source should be free of oil, water, and other impurities.

Main features

The QP series adopts spring braking and pneumatic release; The CQP series is pneumatic braking with spring release.

The overall structure is simple, small in size, and lightweight.

Asbestos free brake pads, green and environmentally friendly.

The installation of the brake pad adopts a spring clamp type, which is convenient and fast to replace.

● The brake pad is easy to adjust after being worn.

Each disc diameter of the QP series brake can be adjusted for four levels of braking torque.

All power sources do not need to be set separately and can be connected to the existing air compression station for grid use. They can be added to the gas supply line

Equipped with a speed control valve, the braking time can be adjusted steplessly.

Note: 1. It can produce pneumatic caliper disc brakes with different disc thicknesses and installation sizes.

2. The specific model and structural dimensions reserve the right to change.

QP series pneumatic caliper disc brakes are mainly used for braking and deceleration of various mechanisms in hoisting, transportation, metallurgy, mining, port, construction and other machinery, as well as tension control of cables, paper making, steel plate and other machinery.

Pneumatic caliper disc brake

QP12.7-A, QP15, QP20, QP25.4, QP30

CQPL12.7A-A; CQPL12.7A-B; CQPL12.7B; QPL12.7A-A; QPL12.7A-B; QPL12.7-A; QPL12.7-B;

QP30-D; QP25.4-D; CQP30-D; CQP25.4-D; PDA5; PDA10; PDB5; PDB10; PDB19; PDC5; PDC10

Electric hydraulic block brakes are widely used for deceleration or parking braking of mechanical drive devices such as lifting, metallurgy, mining, ports, docks, construction machinery, etc. Safe and reliable performance, smooth braking, and high action frequency.

The main swing hinge point is equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use. Comply with standard installation dimensions and JB/ZQ4388-1997 standards.

Operating conditions Environmental temperature: -20 ℃~+50 ℃ The relative air temperature should not exceed 90%. The surrounding working environment should not contain flammable, explosive, or corrosive gases. The altitude of the location of use should comply with GB755-2000. Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.

Note: YWZ4B, YWZB, YWZB, YWZ8, and YWZ13 are interchangeable. YWZB matches the YT type thruster, while YWZ4B, YWZ8, and YWZ13 match the Ed type thruster.

Electric hydraulic block brakes are widely used for deceleration or parking braking of mechanical drive devices such as lifting, metallurgy, mining, ports, docks, construction machinery, etc. Safe and reliable performance, smooth braking, and high action frequency.

The main swing hinge point is equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use. Comply with standard installation dimensions and JB/ZQ4388-1997 standards.

Operating conditions Environmental temperature: -20 ℃~+50 ℃ The relative air temperature should not exceed 90%. The surrounding working environment should not contain flammable, explosive, or corrosive gases. The altitude of the location of use should comply with GB755-2000. Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.