Jiaozuo brake

Characteristics and advantages of electric hydraulic disc brake

The sturdy steel brake arm and base make the brake have less deflection during operation and less idle loss.

The optimized geometric design of the lever ensures that it is not affected by the rotation direction and can achieve greater braking torque within a limited lever ratio.

The square coil spring component is equipped with a torque scale for torque adjustment, which is more simplified, safe, and reliable.

A special brake pressure spring with the smallest possible spring constant can fully utilize aerodynamic force to improve performance during normal release.

Lightweight metal brake shoes are sturdy and durable, with high-quality friction pads with stable friction coefficient, free of asbestos and metal components, environmentally friendly and durable.

The special clamping spring fixes the brake shoe in the appropriate position and adopts a special barrier free design, making the replacement of the brake shoe more convenient and fast.

All main rotating parts are equipped with maintenance free shaft sleeves.

The brake shoe support arm can rotate.

Key components such as pull rods, springs, and pins are made of stainless steel imported from Germany.

Standard components are all galvanized to improve corrosion resistance.

Equipped with precise automatic compensation devices, it can provide certain compensation for the wear of friction plates.

Adopting an equal distance mechanism to ensure synchronous braking on both sides and balanced braking force.

Arm disc brake 3

Ideal brake and emergency brake for container crane, ship unloader, steel casting crane, hydropower bridge crane, Boat lift, cable crane and other equipment.

Technical advantages:

1. All hinge points and shaft pins are tightly matched and self lubricating shaft sleeves are used.

2. The pins are all acid resistant and can reach up to 850 ° C.

7. Automatic compensation for friction plate wear can reduce maintenance times.

8. The boom adopts an equal torque mechanism, and the gap on both sides is equal when releasing the brake.

Features:

1. The braking force increases by more than 70% compared to ordinary designs.

2. Use low elasticity coefficient springs to improve the efficiency of brake release force.

3. Due to the use of spring force as the center, the brake arm is no longer subjected to bending force, thereby extending the lifespan of the shaft sleeve and improving transmission efficiency.

4. The lever plate provides the required load for the system and protects the hinge points and pull rods at the upper end from erosion and damage.

5. The standard design is equipped with a new generation of equal backlash device from the Sieber, which eliminates the need for manual adjustment to meet the equal clearance of the gasket and achieves automatic alignment.

6. Compact and reliable exterior design.

7. Divided into left and right hand designs, with a central layout.