Jiaozuo brake

Electric hydraulic thruster ED Electric hydraulic thruster

Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed301/6

Mainly used as an operating component for the YWZ4, YWZ5, YWZ8, YWZ9, YWL.YW.YWZP series electric hydraulic block brakes. It is widely used in industries such as lifting transportation, metallurgy, mining, port electric hydraulic block brake ports, and construction.

Electric hydraulic thruster ED-23/5, thrust 220N, stroke 50mm, 380V, 165W

; Electric hydraulic thruster; Ed-30/5 thrust 300N stroke 50mm 380V 200W; ED23 network image; Electric hydraulic thruster; Ed-50/6 thrust 500N stroke 60mm 380V 210W; Jiaozuo Gongli Brake Co., Ltd. Electric hydraulic thruster; Ed-80/6 thrust 800N stroke 60mm 380V 330W;

Jiaozuo Gongli Brake Co., Ltd; Electric hydraulic thruster; Ed-121/6 thrust 1250N stroke 60mm 380V 330W;

Jiaozuo Gongli Brake Co., Ltd; Electric hydraulic thruster; Ed-201/6 thrust 2000N stroke 60mm 380V 450W;

Jiaozuo Gongli Brake Co., Ltd. Electric hydraulic thruster; Ed-301/6 thrust 3000N stroke 60mm 380V 550W;

Electric hydraulic thruster

Warning: The thruster should be reliably grounded according to electrical specifications! Attention: When wiring, cut off the power supply and erect a sign at the power switch that reads "Someone is working, do not switch on",

Until the wiring is completed.

When wiring, remove the cover of the thruster junction box (there is a wiring diagram on the reverse side), and connect the three-phase power line (phase sequence is not required) and grounding wire as required. Then cover the junction box cover and tighten the screws (see Figure 4). Note: The protection level of the thruster is IP65. The cable should enter the junction box through a stuffing box (the stuffing box needs to be provided by the user). YT1-45/6 YT1-90/8 Electric Hydraulic Pusher ED Full Drawing YT1-320Z/12 YT1-320Z/20 Electric Hydraulic Pusher