Jiaozuo brake

The technical personnel from the manufacturer of the belt mechanism actuator will provide you with a detailed introduction! Maintenance methods for brakes.

1. The brake is easily infected with oil stains at the driving equipment. To avoid affecting the braking effect, the adjacent oil stains should be promptly sorted out.

2. When cracks appear on the driving wheel of the belt mechanism and the thickness of the brake wheel flange reaches 40% of the original thickness, it should be discarded

3. The gap between the brake and the brake wheel should be adjusted properly, and the brake shoe should not rub against the brake wheel. Regularly check the use of the friction plate

The composition and working principle of a tube belt conveyor. The general structure of a tube belt conveyor is basically the same as that of a regular conveyor, except that a circular tube shape is formed in the middle conveying section from the receiving point to the unloading point. That is, after the tail receiving section, the tape gradually transitions from parallel to groove or deep groove, and then wraps the material and rolls it into a circular tube shape. Belt conveyors can be used for both horizontal and inclined conveying of materials. When the average inclination angle of a belt conveyor that uses inclined conveying of materials is greater than four degrees, when the belt conveyor stops with full load, the belt will reverse when transporting materials up and the belt will slide when transporting materials down, causing accidents such as material accumulation and flying. To avoid this situation, manufacturers will add braking devices during production. Due to the fact that belt conveyors are mainly used in industries such as mining, grain, metallurgy, building materials, chemical, food, etc., and continuously conveying materials in the conveying industry, they also play a leading role in the production of the conveying industry. Therefore, the quality requirements for belt conveyors are also very strict, especially for large conveyors.

YWZ5 Electric Hydraulic Brake

In the forming section of the tube belt conveyor, the tape is forcibly wrapped into a circular tube by hexagonal rollers, and the conveying material is completely enclosed in the circular tube and runs stably with the tape, thus achieving the goal of environmental protection. When reaching the head (or middle discharge point), the tape gradually transitions from a circular tube to a deep groove or groove, and then discharges at the head drum (or middle discharge point). The return section of the belt conveyor belt is basically the same as the load-bearing section, generally forming a circular tube shape, and under certain conditions (through a flipping mechanism), it can achieve bidirectional transmission of ED electric hydraulic thrusters Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed23/5, Ed30/5, Ed50/6, Ed80/6, Ed121/6, Ed201/6, Ed301/6

YWZ9 series electric hydraulic block brake: YWZ9-200/23; YWZ9-200/30; YWZ9-250/23; YWZ9-250/30; YWZ9-250/50; YWZ9-300/30; YWZ9-300/50; YWZ9-300/80; YWZ9-315/30; YWZ9-315/50; YWZ9-315/80; YWZ9-400/50; YWZ9-400/80; YWZ9-400/121; YWZ9-500/80; YWZ9-500/121; YWZ9-500/201; YWZ9-600/121; YWZ9-600/201; YWZ9-600/301; YWZ9-630/121; YWZ9-630/201; YWZ9-630/301; YWZ9-700/201; YWZ9-700/301; YWZ9-710/201; YWZ9-710/301; YWZ9-800/301/12

YWz5 series hydraulic block brake:

YWZ5-200/23, YWZ5-200/30, YWZ5-250/23, YWZ5-250/30, YWZ5-315/50, YWZ5-400/80, YWZ5-400/121, YWZ5-500/121, YWZ5-500/201, YWZ5-630/201, YWZ5-710/301, YWZ5-800/301

There are various types of brakes for belt conveyors, and different forms of brakes can be selected based on the technical performance and specific usage conditions of the conveyor (such as power size, installation angle, etc.). Commonly used types of brakes include belt type backstops, roller backstops, hydraulic electromagnetic brake shoe brakes, and disc brakes. The selection of the braking device for the belt conveyor can consider the following points: mechanical operation status, calculation of load torque on the shaft, and a certain safety reserve. The brake should ensure good heat dissipation function to prevent harm to personnel, machinery, and the environment. Pay full attention to the task of the brake, and select according to their different tasks. To support the braking torque of the brake, there must be a certain Factor of safety to ensure that the mechanism with high safety requirements needs to be equipped with dual brakes.