Jiaozuo brake

5SH, 450SH, 4SH, 3SH

Basic parameters and size tables for 5SH, 450SH, 4SH, and 3SE:

904SH

904SH basic parameter table Connection: 1 screw M12-30+2 M12: grade 10-9 Tightening torque: 50N. m

Braking torque (N. m)=braking force/1000 x[（ Φ B) /2-30]

Φ B - Unit: mm

Used for emergency braking with high braking force N20 000 (pad A) 904-A Used for working braking with high braking force N15 000 (pad M) 904-M Release pressure bar60 Fully released displacement capacity cm333 Total cylinder volume cm398 Response time s0.3 Weight kg28

Electric hydraulic block brake series

YWZB YWZ2 YWZ3B YWZ4B YWZ5 YWZ6 YWZ8 YWZ9 YWZ12 YWZ13 YW YWL TYWZ2 YWP

Electromagnetic block brake

JZ (TJ2A) MW (Z) ZWZA ZWZ2 ZWZ3A DCW3

Electromagnetic failure protection disc brake

5SE 561SE 560SE 56SE

DCPZ12.7

4SE 3SE ST1SE ST2SE 450SE

Hydraulic failure protection disc brake

5SH 4SH 3SH 450SH ST1SH ST2SH ST3SH ST4SH

SB (YQP) SBDST5SH ST10SH ST16SH ST25SH ST25SH-A ST40SH 904SH

Safety brake SBD125 SBD160 SBD200 SBD250 SBD365 SBD425

Electric hydraulic arm disc brake YPZ2 Ⅰ, Ⅱ, Ⅲ YPZ2 Ⅳ, Ⅴ, Ⅵ

ST, SH images

product details 

SE, SH, SP series fail safe disc brake service brake, allowing high frequency braking. High braking force, low maintenance cost, with automatic compensation device for pad wear (stable braking torque), and short response time.

Large installation tolerance, brake disc end face runout: maximum value: ± 0.2mm. The verticality deviation of the base relative to the disc: maximum value: ± 4 ‰.

The Centre-to-centre distance deviation of the brake disc relative to the base: large value: ± 2.5mm.

This series includes the following types of brakes:

561SE, 560SE, 56SE, 5SE, 450SE, 4SE, 3SE brakes (electromagnetic release). When working, there must be an ESE/ESP matching power supply (specific parameters can be found in the matching power supply).

5SH, 450SH, 4SH, 3SH, 904SH brakes (hydraulic release). A hydraulic station is required for operation.

5SP, 450SP, 4SP, 3SP brakes (pneumatic release) (5bar)

The safety brake has a high braking force, just like the working brake.

In case of overspeed, it is used for emergency braking, and under normal circumstances, the static brake response time is short.

Large installation tolerance, brake disc end face runout: maximum value: ± 0.2mm. The verticality deviation of the base relative to the disc: ± 0.4 ‰.

This series includes the following types of brakes: all SE series. Electromagnetic release. When working, it is necessary to have a supporting power supply (see specific parameters in the supporting power supply).

All SH series are mainly ST series. Hydraulic release. Equipped with a hydraulic station during operation.

All SP series. Pneumatic release (5bar)

Note: ST1SE and ST2SE are only suitable for use as safety brakes. It can also be used as a working brake when the frequency of use is very low. According to the different needs of users, the following devices can be installed: pad wear display (achieved by displaying the wear line in the switch or pad). Tel: 13803910788

Brake display (achieved through display switch).

Manual release display (achieved through display switch)

Special applications: Used for sintered pads when the disc temperature is very high, special pads (without sparks, etc.); Special discs (thickness, diameter, material, etc.).

If you have any requirements, please contact our technical personnel.

Spring brake - hydraulic obstruction - suitable for disc thickness: 30mm

ST1SH, ST2SH, ST3SHW

Basic parameters and dimensions of ST1SH, ST2SH, and ST3SH Φ B - Unit: mm

Basic parameter braking force torque formula N.m braking torque=braking force/1000 X（ Φ B/2-68) Response time S0.2 Backward distance on both sides mm0.7 Release pressure bar100 Oil inlet size "Z1/4 Rated customized power NST1SE: 35000 (safety braking)/25000 (working braking) ST2SE: 70000 (safety braking)/50000 (working braking) ST3SE: 147000 (safety braking)/105000 (working braking) Overall dimension mm Fully released displacement capacity cm3 ST1SH: 18 ST2SH: 50 ST3SH: 135 Total cylinder volume cm3 ST1 SH: 34 ST2SH: 83 ST3SH: 227 Weight Kg ST1SH: 117 ST2SHE: 117 ST3SH: 118AA=0. 203 x Φ B+211CC=0.456 x Φ B-133D25E285F340G180H410I90J230K200L213.5M55N5OM30P27.5

ST3SH-A

ST3SH-A basic parameter braking torque (N.m)=braking force/1000 x[（ Φ B) /2-68] Oil inlet: M18x1.5 Φ B - Unit: mm

Braking force N220 000, release pressure bar110-120, fully released displacement capacity cm3180, total cylinder volume cm3310, response time s0.2, weight kg118Amm=(0.171 x Φ B) +240Cmm=(0.47 x Φ B) -120

ST10SH, ST16SH, ST25SH, ST40SH

ST10SH: Connection: 8 bolts M 24 grade 12.9 Tightening torque 1000NM;

ST16SH: Connection: 8 bolts M 30 grade 12.9 Tightening torque 1350NM;

ST25SH: Connection: 8 bolts M 30 grade 12.9 Tightening torque 1500NM;

ST40SH: Connection: 8 bolts M 39 grade 12.9 Tightening torque 5000NM;

ST10SH, ST16SH, ST25SH, ST40SH Basic Parameters and Dimension Tables Unit (mm)

Brake model ST10SHST16SHST25SHST40SH Basic parameters Braking torque formula: N.m Braking torque=Braking force/1000x（ Φ B/2-75) Braking torque=braking force/1000x（ Φ B/2-90) Braking torque=braking force/1000 x（ Φ  B/2-90) Braking torque=braking force/1000 x (B/2-100) Customized power N810001500002000020000288000, oil inlet size: M18x1.5, clearance mm212, working pressure MPa131519, cylinder volume mL275360560810, response time S0.2, fully released displacement capacity mL32218831, weight Kg 218286, external dimensions A456572100C457090100D190260302367F25323241G5565100H130135150219i95110130168J300345380522K4560119L31537040462M190205220268N8888990O353100P48484850Q28888288306 R648600650630

ST25SH-A

ST25SH-A basic parameter table connector: 8 bolts M30; Level 12.9; Tightening torque 1500NM

Braking torque (N.m)=braking force/1000x[（ Φ B/2) -75]

Φ B - Unit: mm

Large braking force N230000200000180000150000 clearance mm1.02.03.04.0 release pressure bar190 fully released displacement capacity ml95 cylinder volume ml560 response time s0.2 weight kg280

ST25SH-C

ST25SH-C basic parameter table connector: 4 bolts M36; Level 12 9; Tightening torque 4280NM

Braking torque (N.m)=braking force/1000 x[（ Φ B/2) -60]

Φ B - Unit: mm

Large braking force N230000200000180000150000 clearance mm1.02.03.04.0 release pressure bar160 cylinder volume ml570 fully released displacement capacity ml115 response time s0.2 weight kg280

ST4SH, ST5SH

ST4SH: 4 screws M33 for connectors: grade 10-9; Tightening torque: 685N. m;

2 screws M24: grade 10-9; Tightening torque: 255N. m;

ST5SH: 6 screws for connecting piece M33: grade 10-9; Tightening torque: 1600N. m

ST4SH, ST5SH Basic Parameters and Dimension Tables Unit (mm)

Basic parameter braking torque formula Nm Braking torque=braking force/1000 x（ Φ>  B/2-108) Single side retreat mm1 release pressure barST4SH: 100 ST5SH: 190 oil inlet size "ST4SH: Z1/4 ST5SH: Z1/2 customized power NST4SH: 120000 (safety braking)/90000 (work braking) ST2SE: 70000 (safety braking)/22000 (work braking) Response time S0.2 Overall size mm Full release displacement capacity cm3ST4SH: 110 ST5SH: 120 Total cylinder volume cm3ST4SH: 408 ST5SH: 678 Weight KgST4SH: 285 ST5SH: 440A80C100D125F336GST4SH: 200 ST5SH: 204HST4SH: 355 ST5SH: 4201140J155K173L460M190N410 0ST4SH: 617 ST5SH: 970P40Q34R25SST4SH: 4 ST5SH: 6TST4SH: 2 ST5SH: 0