Jiaozuo brake

Copy of 5bfe816aa43ef

When installing and using electromagnetic clutches and brakes, the following precautions should be taken:

1. The materials used for electromagnetic clutches and brakes are soft materials. During installation, attention should be paid to falling, collision, or excessive force to avoid deformation of the product and affecting its use.

2. The friction surfaces of the clutch and brake should not have dirt such as oil or dust. Please clean them with acetone or alcohol during installation, otherwise it will affect the torque and the service life of the product.

3. When installing the electromagnetic clutch and brake, ensure the coaxiality of the magnetic yoke and rotor, as well as the verticality of the shaft, and ensure the value of the clearance a between the two friction pairs and the air gap between the rotor and the magnetic yoke.

4. The outgoing lines of the clutch and brake are directly led out from the magnetic yoke. Please do not pull too tightly, do not use force to pull or bend to avoid damage.

5. When installing the combination clutch, please do not use a hammer to drive the sprocket, coupling, or pulley at the input and output ends.

6. When pressing in the rotor and moving disc of the electromagnetic clutch and electromagnetic brake, add a sleeve at the orifice for protection, and do not use a hammer to directly drive in.