Complies with German D1N15435 and JB/T7020-2006 standards
● The interlocking back distance equalization device can always maintain equal back distance between the two sides of the tiles during use, completely avoiding braking on one side due to uneven back distance
● The phenomenon of floating brake discs on village pads and equipped with automatic tile tracking devices:
● The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use:
● The brake spring is arranged in a square spring tube: and there is a brake torque scale on one side, which directly displays the brake torque and is easy to adjust and intuitive:
● The asbestos free brake pad is plug-in and easy to replace:
● The automatic compensation device for brake pad wear can maintain a constant distance between the pads and the brake torque during use:
● Some additional functions can be achieved by adding additional devices:
● Manual release device:
● Releasing or closing the limit switch can realize the signal display of whether the brake is normally released or closed:
● Brake pad wear limit switch, which can achieve automatic signal display when the brake pad is worn to its limit
The E-series thruster with a delay valve is used to achieve delayed closure of the brake and smooth braking.
Usage conditions:
● Environmental temperature -20 ℃~+50 ℃:
● The relative humidity of the air shall not exceed 90%;
● Generally used for three-phase AC power supply 50Hz, 380V (60Hz or different voltages can also be produced according to needs, please specify when ordering):
● The altitude meets the GB755-2000 standard. When the temperature is below -20 ℃, the working oil of the thruster should be changed to YH-10 aviation hydraulic oil or equipped with a heater as required. Please refer to the Ed thruster sample for details.
● Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.
